I. Product Overview
Y18 — a 24W architect-style LED desk lamps with a broad rotating head, built for drafting tables, studios and inspection benches.
- Light output: 117 LED chips, up to 1200 lumens at maximum power, with CRI > 80 so colour-critical work stays accurate.
- Control: 10-step dimming across five color temperatures, so one unit covers inspection work and evening paperwork.
- Build: steel arm and head with a wide metal shade that turns and tilts through a broad arc; 2 kg unit weight keeps it stable on a clamped mount.
- Power: 24V / 1A adapter included — arrives ready to plug in once the plug type is specified.
- Service life: rated beyond 40,000 hours.
- Shipping: 6 pcs per carton, 0.13 CBM, 13 kg gross — 1,292 pcs per 20ft, 3,138 pcs per 40HQ. Above 200 pcs the packing switches to a 525x206x84mm inner box and a 53x43x42cm master of 10 units at 21 kg.
II. Product Advantages
1. A broad head that lights the whole sheet, not one spot
117 chips sit behind a wide head, so the beam covers an A2 drawing in a single pass instead of leaving the corners of the sheet in shadow. Drafters stop repositioning the arm every few minutes, and inspection work no longer depends on where the unit happens to be standing.
2. Five color temperatures and ten steps, in one unit
A single platform covers 6000K inspection light down to a softer evening setting, across ten brightness steps. For a distributor that means one model instead of several fixed-output variants; for the end user it means the unit is not retired the moment the job changes.
3. Steel where the load actually sits
A 2 kg head on a long arm puts real torque on the joints. Steel carries that load where molded resin creeps and sags within a season, and the head holds the angle it is set to. This is the failure point that decides whether a lamp survives year two in a working studio.
4. Plug-in ready, no PSU hunt
The 24V / 1A adapter ships in the box. Buyers do not have to source a matching supply or risk a wrong-voltage return, which is the most common after-sales complaint on high-power desk units. Plug type is specified at order stage, so each market gets the right lead.
5. Two packing schemes, both built for freight math
Standard packing is 6 pcs per carton at 0.13 CBM and 13 kg gross, loading 1,292 into a 20ft. Above 200 pieces the configuration moves to a 525x206x84mm inner box and a 53x43x42cm master of 10 units at 21 kg, which cuts per-unit volume and lowers the freight each piece carries.
Commercial terms: MOQ 500 units. Volume terms, packing configuration and lead time are quoted per order against target quantity and destination market.
III. Product Applications
- Architecture and drafting studios — a broad head covers A2 sheets and large-format printouts without repositioning.
- Engineering and inspection benches — 6000K output and CRI > 80 for reading part markings, solder joints and surface defects.
- Sewing and pattern cutting tables — raking light from a clamped head shows grain, stitch density and seam alignment.
- Photography and retouch stations — even output across a flat-lay area instead of a hotspot that blows out the centre.
- Home offices with dual monitors — clamped to the table edge, leaving the full surface for screens, keyboard and documents.
- School and university labs — steel arm resists daily adjustment by rotating cohorts.
- Retail display and demo units — white or black finish matches most fixture schemes.
- Mobile repair and assembly benches — high output at close range for small-component work.
EN
